Shipbucket

"there are some parts you haven't drawn yet (you can see the original drawing through it)"
actually there are some parts that look like they are from the original drawing but they arnt i drew over the real drawing and it looks like that...
"(and please redo the bridge, look to the dutch jss for example how this should be done)"
Yea the bridge looks wrong and messed up i am trying to fix it.
" the flags, liferafts and doors. to do that, you have to do a lot of research"
Wow thanks for telling i rly didt know that, i was thinking of putting the doors and the flag.

_________________

Work-list:
1.Candian JSS concept (needs more work on it)
2.Mary celeste (All most done 40% completed)
4.German CV europa (dont know if i should do it)

good you want to improve it... but if you draw over that parts, it isn't shipbucket. you have to show them like how they are shown in sb style, not how they are done in the 3d model.... again look to other ships to see how they are done. if you really don't know how, I can show you by doing a bit, but you REALLY should try it yourself first. you also have done the doors wrong: this way they look like huge loading ramps. and you also got the fencing for the helideck wrong... again, look at other ships on the main site how it is done.

(btw and remove the 'done with it' on your signature, you aren't halfway)

_________________
Drawings are credited with J.Scholtens
I ask of you to prove me wrong. Not say I am wrong, but prove it, because then I will have learned something new.
Shipbucket Wiki admin

WOW... No comment.

_________________
Salide - Denton - The Interrealms

I am not very active on the forums anymore, but work is still being done on my AUs. Visit the Salidan Altiverse Page on the SB Wiki for more information. All current work is being done on Google Docs.
If anyone wishes for their nations to interact with the countries of the Salidan Altiverse, please send me a PM, after which we can further discuss through email.

Just take my dutch jss as example for the whole ship.
It is based on each other, the bridge are exactly the same if im right...

_________________
Fryssian AU with Lt.Maverick 114
viewtopic.php?f=14&t=9802&p=193331#p193331

Embarked on: HNLMS Karel Doorman A833
To do list:
-Zeven Provincien class cruiser
-Joint support ship all sides
-F124 Sachsen class frigate
-F125 Baden-Württemberg class frigate
-Clemencau class aircraft carrier
-Zeven provincien class frigate
-Poolster class AOR
-Amsterdam class AOR
-Minas Gerais aircraft carrier

That's incorrect. The first ship is not yet under construction, although the Canadian government has officially announced that it will purchase two Joint Support Ships with the option for a third. Given that the contracts haven't even been awarded to the shipbuilders yet, I expect we won't see the first JSS until a few years later than 2014 - if it doesn't get mired any further in the quagmire that is Canadian defence procurement.

http://www.thestar.com/news/canada/arti ... -6-billion

Note that that article was published in July, 2010.

I didn't get much time to draw so i couldn't finish the stuff but fineally i think i could be done with it but somthing just seem wrong about the ship... so please comment



I took some parts of the dutch JSS so i gave credit to the person who drew it...

_________________

Work-list:
1.Candian JSS concept (needs more work on it)
2.Mary celeste (All most done 40% completed)
4.German CV europa (dont know if i should do it)

she looks great but some of the coloring seems a little off/

_________________
Supreme Commander of the Astrofleets

Ehm since when does it have those LCVP's?
It only has a rhib per side...
Plus it has a big door in the back, not a Ro-Ro like the dutch one.

_________________
Fryssian AU with Lt.Maverick 114
viewtopic.php?f=14&t=9802&p=193331#p193331

Embarked on: HNLMS Karel Doorman A833
To do list:
-Zeven Provincien class cruiser
-Joint support ship all sides
-F124 Sachsen class frigate
-F125 Baden-Württemberg class frigate
-Clemencau class aircraft carrier
-Zeven provincien class frigate
-Poolster class AOR
-Amsterdam class AOR
-Minas Gerais aircraft carrier

the bridge is still wrong, the mast is way simpler then the dutch one (not an I-mast, not even with the same stuff on it) and the landing ships need to be replaced by rhibs behind an door. and the loading bays or whatever they are which are again wrong.... if you don't know how, I can try to do some of it... there is some improvement, but not much, and this looks nothing like the canadian JSS

_________________
Drawings are credited with J.Scholtens
I ask of you to prove me wrong. Not say I am wrong, but prove it, because then I will have learned something new.
Shipbucket Wiki admin

I did research... it said it will have 2 LCVP
and Thanks for tell about the doors and the rhib

_________________

Work-list:
1.Candian JSS concept (needs more work on it)
2.Mary celeste (All most done 40% completed)
4.German CV europa (dont know if i should do it)