Moderator: Community Manager
[Post Reply] [*]  Page 31 of 36  [ 353 posts ]  Go to page « 129 30 31 32 3336 »
Author Message
acelanceloet
Post subject: Re: belowdeck partsPosted: June 3rd, 2014, 6:23 pm
Offline
User avatar
Posts: 7510
Joined: July 28th, 2010, 12:25 pm
Location: the netherlands
I see no need for real difference between the 2, if you look up belowdeck parts you know what the DDG-51 class is.

that said, is that engine purely used as generator, or is there an shaft driver version as well?
well drawn shipright, I will add it the next time I update the first post.

_________________
Drawings are credited with J.Scholtens
I ask of you to prove me wrong. Not say I am wrong, but prove it, because then I will have learned something new.
Shipbucket Wiki admin


Top
[Profile] [Quote]
Shipright
Post subject: Re: belowdeck partsPosted: June 4th, 2014, 3:19 pm
Offline
Posts: 397
Joined: February 15th, 2013, 2:16 pm
I am not sure, I have only seen it used as a generator myself. The RR source I linked makes me think it is a dedicated genset.


Top
[Profile] [Quote]
erik_t
Post subject: Re: belowdeck partsPosted: June 5th, 2014, 4:53 am
Offline
Posts: 2936
Joined: July 26th, 2010, 11:38 pm
Location: Midwest US
As far as I am aware, a direct-drive variant does not exist in the shipboard sense. That doesn't mean that such gensets are not or could not be used as prime movers, but I believe they would need to be in an electric-drive configuration. Ultimately, the system uses the same turbomachinery core as the Allison 501 (and the T56), so for varying values of "variant", certainly there are many thousands of direct-drive systems out there...


Top
[Profile] [Quote]
MihoshiK
Post subject: Re: belowdeck partsPosted: June 9th, 2014, 7:13 pm
Offline
User avatar
Posts: 1035
Joined: October 16th, 2010, 11:06 pm
Location: In orbit, watching you draw.
Contact: Website
Not really a belowdeck part, because it's essentially bolt-on, but I didn't want to start a whole thread for it.
The Rheinmetall MASS decoy launcher.

[ img ]

Which I needed because I'm thinking about redoing HMS Halifax. The old drawing is quite terrible, and after the FELEX upgrade, this is bolted on the ship.

_________________
Would you please not eat my gun...
[ img ]


Top
[Profile] [Quote]
heuhen
Post subject: Re: belowdeck partsPosted: June 9th, 2014, 7:35 pm
Offline
User avatar
Posts: 9102
Joined: December 15th, 2010, 10:13 pm
Location: Behind you, looking at you with my mustache!
no side view.

it's the one aft of the 76mm. is the only version of the side-view I have, you might do an better one.
http://shipbucket.com/images.php?dir=Re ... 202003.png


Top
[Profile] [Quote]
MihoshiK
Post subject: Re: belowdeck partsPosted: June 9th, 2014, 7:57 pm
Offline
User avatar
Posts: 1035
Joined: October 16th, 2010, 11:06 pm
Location: In orbit, watching you draw.
Contact: Website
heuhen wrote:
no side view.

it's the one aft of the 76mm. is the only version of the side-view I have, you might do an better one.
http://shipbucket.com/images.php?dir=Re ... 202003.png
The magic word is "Please".

"Can you please draw a side view too?"

Yes Heuhen, I can. Not eveyone is interested in every concievable angle of a part, which is why at first I didn't bother.

[ img ]

_________________
Would you please not eat my gun...
[ img ]


Top
[Profile] [Quote]
heuhen
Post subject: Re: belowdeck partsPosted: June 9th, 2014, 9:10 pm
Offline
User avatar
Posts: 9102
Joined: December 15th, 2010, 10:13 pm
Location: Behind you, looking at you with my mustache!
yeah sorry. but thank's. I'll can do an top view later, if you doesn't bother to do that. (it's mainly for Skjold class drawing!)


Top
[Profile] [Quote]
acelanceloet
Post subject: Re: belowdeck partsPosted: June 19th, 2014, 6:20 pm
Offline
User avatar
Posts: 7510
Joined: July 28th, 2010, 12:25 pm
Location: the netherlands
[ img ]
a second set of eendracht main guns, this time with the turrets such as they were fitted on the Tre Kronor class.
interesting is that the dutch schematics showed much shorter barrels on the drawing.......

_________________
Drawings are credited with J.Scholtens
I ask of you to prove me wrong. Not say I am wrong, but prove it, because then I will have learned something new.
Shipbucket Wiki admin


Top
[Profile] [Quote]
acelanceloet
Post subject: Re: belowdeck partsPosted: June 20th, 2014, 8:31 pm
Offline
User avatar
Posts: 7510
Joined: July 28th, 2010, 12:25 pm
Location: the netherlands
[ img ]
a copy of this same file is in the Swedish parts thread as well

_________________
Drawings are credited with J.Scholtens
I ask of you to prove me wrong. Not say I am wrong, but prove it, because then I will have learned something new.
Shipbucket Wiki admin


Top
[Profile] [Quote]
MihoshiK
Post subject: Re: belowdeck partsPosted: June 26th, 2014, 8:06 pm
Offline
User avatar
Posts: 1035
Joined: October 16th, 2010, 11:06 pm
Location: In orbit, watching you draw.
Contact: Website
The original part for this is almost twice as big as it should be...

[ img ]

_________________
Would you please not eat my gun...
[ img ]


Top
[Profile] [Quote]
Display: Sort by: Direction:
[Post Reply]  Page 31 of 36  [ 353 posts ]  Return to “Parts Sheets Discussion” | Go to page « 129 30 31 32 3336 »

Jump to: 

Who is online

Users browsing this forum: No registered users and 0 guests


The team | Delete all board cookies | All times are UTC


Powered by phpBB® Forum Software © phpBB Limited
[ GZIP: Off ]