Shipbucket

I can think of this image -


Of course, I don't know if that's any help.

_________________
Salide - Denton - The Interrealms

I am not very active on the forums anymore, but work is still being done on my AUs. Visit the Salidan Altiverse Page on the SB Wiki for more information. All current work is being done on Google Docs.
If anyone wishes for their nations to interact with the countries of the Salidan Altiverse, please send me a PM, after which we can further discuss through email.

too small too sinkable a cording to comments
http://fc02.deviantart.net/fs70/f/2013/ ... 6xihkh.png

update 2 from comments

_________________
I love alternate WWII history
i will edit or upgrade most posts, all previous images are on my devinart page
http://daa14.deviantart.com/ I am a concept artist I/E guns hull
good stuff starts on page 10
work list:

• USS Kearsarge crane ship No. 1(on hold) need pics
  top down weapon and plane sheets

Your certainly getting there.
I'd recommend putting smaller main gun turrets (though its not a priority), add details from looking at cruisers from the era, eliminating the casemates since they will all flood at high speed(especially the forward one), and adding gun dubs for the AA guns.

_________________
Projects:
Zealandia AU
John Company AU
References and feedback is always welcome!

USS Wake primary role convoy escort

_________________
I love alternate WWII history
i will edit or upgrade most posts, all previous images are on my devinart page
http://daa14.deviantart.com/ I am a concept artist I/E guns hull
good stuff starts on page 10
work list:

• USS Kearsarge crane ship No. 1(on hold) need pics
  top down weapon and plane sheets

For starters, hah. Casemate placement is amusing to say the least on the cruiser.

Ditch the casemated guns completely.
Re-work the placement of the 1.1" and 20mm and possibly reduce numbers as well.
Re-distribute the 5" guns (Cleveland or Brooklyn style)
Embiggen the main mast and add a mizzen mast?

As for the carrier... IMO there's way to little freeboard and one hell of a high structure on top of said low hull. Doesn't seem practicable or even feasible.

_________________
AU Projects: | Banbha et al. | New England: The Divided States
Blood and Fire

That underwater hull comes from Wakazashi/Hood HMS Hood drawing. So i suggest to add proper crediting

_________________
My Worklist
Sources and documentations are the most welcome.

-Koko Kyouwakoku (Republic of Koko)
-Koko's carrier-based aircrafts of WWII
-Koko Kaiun Yuso Kaisha - KoKaYu Line (Koko AU spinoff)
-Koko - Civil Aviation

What equivalent era are you going for? I ask as the tech of the turrets you are using is after casmate guns were abandoned. You can have them, but I would suggest using turrets/guns from the era they existed.

hopefully final vernon baker

_________________
I love alternate WWII history
i will edit or upgrade most posts, all previous images are on my devinart page
http://daa14.deviantart.com/ I am a concept artist I/E guns hull
good stuff starts on page 10
work list:

• USS Kearsarge crane ship No. 1(on hold) need pics
  top down weapon and plane sheets

I'm going to be blunt. Start again, without just chopping bits and pieces off of other drawings. Look at the drawing of HMS Hood above this and you'll see what I mean.

_________________
AU Projects: | Banbha et al. | New England: The Divided States
Blood and Fire

any suggestions

_________________
I love alternate WWII history
i will edit or upgrade most posts, all previous images are on my devinart page
http://daa14.deviantart.com/ I am a concept artist I/E guns hull
good stuff starts on page 10
work list:

• USS Kearsarge crane ship No. 1(on hold) need pics
  top down weapon and plane sheets