Shipbucket
https://111903.jhzobq.asia/forums/

Propulsion system size question...
https://111903.jhzobq.asia/forums/viewtopic.php?f=5&t=3392
Page 1 of 2

Author:  Prizyetsa [ August 14th, 2012, 3:56 pm ]
Post subject:  Propulsion system size question...

Hello all. For those of you who don't know me, I usually hang out in the AU threads. Recently, I've started to try to make my designs more realistic, by starting with the innards of the ship and working around that.

Now for the question; Are there any good sources to find the sizes of power-plants, most notably gas turbines and nuclear reactors? I know that there are good sources here on Shipbucket showing the internal systems of a few weapons like deck guns and missile launchers, but none of propulsion systems...

Any help would be very much appreciated, thanks. :)

Author:  heuhen [ August 14th, 2012, 4:23 pm ]
Post subject:  Re: Propulsion system size question...

Caterpillar Marine have some drawing of their engine up to a size but not very big engine.

Author:  Prizyetsa [ August 14th, 2012, 6:39 pm ]
Post subject:  Re: Propulsion system size question...

Huh, this is really interesting, thanks a lot my Norsky friend! Do you know where I can find more military engines?

Author:  heuhen [ August 14th, 2012, 6:58 pm ]
Post subject:  Re: Propulsion system size question...

it depends what type of engine you want.

Author:  Prizyetsa [ August 14th, 2012, 7:02 pm ]
Post subject:  Re: Propulsion system size question...

Something similar to the General Electric LMS100. I'm not very comfortable scaling just based on people, but I suppose I could try...

Author:  Prizyetsa [ August 14th, 2012, 7:05 pm ]
Post subject:  Re: Propulsion system size question...

There's this [1], but I'm not sure that that's the engine, so I won't be able to label it for future use. Same goes for this, [2]...

[1] http://bermudaisanotherworld.org/forum/ ... 6#msg20896 (Second pitcure down.)
[2] http://www.dieselduck.ca/machine/01%20p ... lation.jpg (General Electric LM2500)

Author:  TimothyC [ August 14th, 2012, 7:17 pm ]
Post subject:  Re: Propulsion system size question...

Well, Ryan Crierie has some data on reactor compartment sizes in The Big Book of Warfare.

Author:  Prizyetsa [ August 14th, 2012, 7:20 pm ]
Post subject:  Re: Propulsion system size question...

Thanks a lot, I'll use this :)

Author:  Prizyetsa [ August 14th, 2012, 7:47 pm ]
Post subject:  Re: Propulsion system size question...

Would it be okay for me to make an engine parts sheet?

Author:  heuhen [ August 14th, 2012, 9:33 pm ]
Post subject:  Re: Propulsion system size question...

LM2500 is in the bellow deck part sheet.

Engine Part sheet, look at Ace bellow deck parts sheet, there you have the LM2500 and some other engine, all engine that you draw bellong to the bellow deck part sheet, just because an engine is something that is bellow deck!

Page 1 of 2 All times are UTC
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/