Shipbucket
https://111903.jhzobq.asia/forums/

Overhang shading question
https://111903.jhzobq.asia/forums/viewtopic.php?f=5&t=10838		 Page 1 of 1
Author:  CodumCallum1666 [ June 26th, 2023, 12:14 am ]
Post subject:  Overhang shading question
So i've tried work on shading the wing propellers of the Olympic class liners and this is my first attempt:
[ img ]

This is the method i use to shade that part of the drawing.
[ img ]

I used this same strategy on the overhang of the A deck promenade too.

Now I know there is a guide to overhang shading but I'm not sure if I'm doing it right or how to shade that particular shape. One of my concerns is a matter regarding the depth of the shadow so that the wing propellers don't give of the impression or either being too far extended or too close to the hull.

I don't think the guide instructed the shading of a structure of that nature.

second concern i have is if i need to add the shadow of the actual propellers as well.
Author:  CodumCallum1666 [ June 27th, 2023, 11:35 am ]
Post subject:  Re: Overhang shading question
bump
Author:  CodumCallum1666 [ June 27th, 2023, 1:03 pm ]
Post subject:  Re: Overhang shading question
This is the best that i could do and I'm sure it's wrong because i used the 45 degree shading rule The shadow follows the assumption that the light source is angled at 45 degrees,
[ img ]

not to mention that's how it's cast in many photo's i've seen of Olympic's propellers.
[ img ]
[ img ]
[ img ]

The actual overhang shadow cast by the wing propellers is straight down and the propeller blades cast a seperate shadow against the hull,

Is there any sort of rule that i need to follow? because I'm sure that this is nor how they would have casted such a shadow in real life.

If anyone has any idea on how it should properly be done, please come forward to help. just be sure to provide visual examples since I can better comprehend any advice in that format.

something that reflects it's irl shading as well as staying consistent with the shading of the rest of the hull.
Author:  heuhen [ June 27th, 2023, 2:41 pm ]
Post subject:  Re: Overhang shading question
you can use that way of doing shading, but move the shades a little more aft, since the light source aren't directly from above, but from above-front
Author:  CodumCallum1666 [ June 27th, 2023, 11:05 pm ]
Post subject:  Re: Overhang shading question
heuhen wrote: *June 27th, 2023, 2:41 pm
you can use that way of doing shading, but move the shades a little more aft, since the light source aren't directly from above, but from above-front
question here is how far aft and what angle is the light suppose to be casting such shadows from?

Another problem i have is what the propeller's shadow would look like as the blades are twisted.
Author:  CodumCallum1666 [ June 28th, 2023, 3:24 am ]
Post subject:  Re: Overhang shading question
heuhen wrote: *June 27th, 2023, 2:41 pm
you can use that way of doing shading, but move the shades a little more aft, since the light source aren't directly from above, but from above-front
any idea on what angle the light is supposed to be shining from?
Author:  heuhen [ June 28th, 2023, 8:58 am ]
Post subject:  Re: Overhang shading question
that is something you decide for your self.... I usually use 45 degree
Author:  CodumCallum1666 [ June 28th, 2023, 12:41 pm ]
Post subject:  Re: Overhang shading question
heuhen wrote: *June 28th, 2023, 8:58 am
that is something you decide for your self.... I usually use 45 degree
i would like to see some examples of your shading.
Author:  CodumCallum1666 [ June 28th, 2023, 1:10 pm ]
Post subject:  Re: Overhang shading question
I have also seen some unfinished renders of 35 models of Titanic that show similar shading under the wing propeller:

[ img ]
[ img ]
[ img ]
Page 1 of 1 All times are UTC
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/