Shipbucket https://111903.jhzobq.asia/forums/ |
|
Aircraft designs that i modified https://111903.jhzobq.asia/forums/viewtopic.php?f=27&t=7086 |
Page 1 of 2 |
Author: | Filthy-Prankd [ July 16th, 2016, 3:41 am ] |
Post subject: | Aircraft designs that i modified |
Shown here are aircraft that i have modified. Full credit goes to users that made the original aircraft: (Darth Panda, nighthunter, etc.) Send me a quick message if i accidentally did not give credit to the creators of the aircraft. More are to come soon. |
Author: | eswube [ July 16th, 2016, 1:21 pm ] |
Post subject: | Re: Aircraft designs that i modified |
First of all, welcome to the Shipbucket! It's nice that You're trying, but I'm afraid that I can't really say anything genuinely positive about Your work. 1) Is it supposed to be Pe-2 or it's just a loose idea about "how would Pe-2 look if it look more like VI-100 and less than it actually looked like"? Because if it's supposed to be Pe-2, then it should be captioned "Soviet Union, Petlyakov Pe-2". Also the credits should be (Kilomuse & Filthy-Prankd) - made with more-or-less same font (which shouldn't be bold, and generally You ought to take care about anti-aliasing). 2) SB/FD drawings should have shading - parts that are oriented upwards should have lighter shade (becuse the light falls on them), while those oriented downwards should have darker shade. 3) As far as I know, both Soviet and Finnish Pe-2's didn't had camouflaged bottom parts of the wings (and fuselage etc. etc.). http://wp.scn.ru/en/ww2/b/265/1/0 http://wp.scn.ru/en/ww2/b/265/78/0 4) And last but not least - although Pe-2 was a direct descendant of VI-100, trying to use the drawing of VI-100 to make Pe-2 is practically pointless, as the only major part that could be perhaps useful to retain from such drawing would be rear part of the fuselage - after sufficient adaptation (that is, without having aft crew compartment simply erased, leaving a huge dent in the upper fuselage ). In reality, the vertical stabilzers, wings, engine nacelles, cockpit and nose were all different in Pe-2. It just so happens, that I'm working on Pe-2 right now and I believe that more correct representation would be more like this: (and no, You're not supposed to use it at this point - not before it's "formally" posted on template and so on) |
Author: | Filthy-Prankd [ July 16th, 2016, 6:39 pm ] |
Post subject: | Re: Aircraft designs that i modified |
Sorry. I'm a first timer on making artwork on shipbucket. I'm not really a great artist when it comes to drawing aircraft. |
Author: | eswube [ July 17th, 2016, 10:42 am ] |
Post subject: | Re: Aircraft designs that i modified |
You did nothing to apologize for. I just advise You to try getting more practice and take more attention to details. |
Author: | Filthy-Prankd [ July 17th, 2016, 11:30 am ] |
Post subject: | Re: Aircraft designs that i modified |
well my bad. |
Author: | Filthy-Prankd [ September 3rd, 2016, 4:22 am ] |
Post subject: | Re: Aircraft designs that i modified |
After a few hiatus and school, i have returned, using WhyMe's A6M2-N model and modified to the legendary A6M. Don't know if I did good.. |
Author: | eswube [ September 3rd, 2016, 8:38 am ] |
Post subject: | Re: Aircraft designs that i modified |
Regarding the drawing: do something with anti-aliasing of the captions, and credits now should be (WhyMe & Filthy-Prankd). But more importantly: Remove that photograph from the signature! It's not something proper for your petty amusement. |
Author: | Gollevainen [ September 3rd, 2016, 9:22 am ] |
Post subject: | Re: Aircraft designs that i modified |
Yea, guys, use common courtesy and politeness when regarding signatures and avatars. I fixed the issue now manually, lets not repeat it, ok? |
Author: | Filthy-Prankd [ September 3rd, 2016, 1:56 pm ] |
Post subject: | Re: Aircraft designs that i modified |
alright |
Author: | Colosseum [ September 3rd, 2016, 5:51 pm ] |
Post subject: | Re: Aircraft designs that i modified |
LOL, what was the signature? I missed it. Filthy Frank as an avatar is a bit much for this forum, while I might laugh at it (I've been to the very depths of the internet and no depravity phases me), most of these guys won't understand it (certainly don't link his videos...) |
Page 1 of 2 | All times are UTC |
Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |