Shipbucket
https://111903.jhzobq.asia/forums/

Keissers AU workshop
https://111903.jhzobq.asia/forums/viewtopic.php?f=15&t=7770		 Page 1 of 1
Author:  Keisser [ June 29th, 2017, 6:47 am ]
Post subject:  Keissers AU workshop
So, here I will post my drawings. As I draw chaotically and spontaneous, I won't start any systematized alternative universe. Just a random designs in this topic.
Lets start.
[ img ]
Superheavy cuiser of Proletary class.
Total displacement: 27 500 tons.
Length, beam and draught: 261,3 m/28 m/8 m
Main battery: 4x2 240 mm/50 guns, 175 shells per gun
Secondary battery: 6x2 130 mm/50 dual purpose guns, 200 shells per gun
Special weapons: 2 miniature submarines
Armor: 200...220 mm main belt, 45 mm torpedo bulkheads total, 75 mm armor decks, 305 mm conning towers
Engines: 150 000 ihp (112 000 kW), may be forced to 180 000 ihp
Speed: 33 kts (34,6 kts at full flank speed)
Range: around 8 000 nm at 14 kts

Proletary class consists of two ships:
- Proletary (Пролетарий, meaning "Proletarian")
- Put Rabochikh (Путь рабочих, meaning "The Way of Workers").
Author:  erik_t [ June 29th, 2017, 2:47 pm ]
Post subject:  Re: Keissers AU workshop
That aft cutout would be a structural nightmare. Even without it, I am not sure you have a sufficiently deep hull for such length. Also consider where your shaftlines trace into the hull, and where your turbines will have to be located.

The drawing is reasonably well executed, though.
Author:  Keisser [ June 30th, 2017, 11:42 am ]
Post subject:  Re: Keissers AU workshop
Thank you for response, erik_t.
Drawing updated.
Author:  Keisser [ August 10th, 2017, 12:22 pm ]
Post subject:  Re: Keissers AU workshop
[ img ]
Length x Beam x Draught: 173.8 x 26 x 7.8 m
Displacement: 19 784 t standard, 21 365 t full load
Main armament: 4x2 12"/55 guns
Secondaries: 4x2 6"/50 guns, 4x1 4.7"/50 AA guns
Armor: 320 mm main belt, 75 mm bulkheads, 50...140 mm deck, 356 mm conning tower, 152...305 mm main turrets and barbettes
Machinery: oil fired boilers, 50 000 ihp = 24.45 kts
Range: 5 000 nm at 14 kts
[ img ]
Length x Beam x Draught: 211.2 x 30 x 8.8
Displacement: 24 315 t standard, 25 914 t full load
Main armament: 2x3 15"/50 guns
Secondaries: 6x2 6"50 guns, 6x1 4.7/50" AA guns
Armor: 320 mm main belt, 75 mm bulkheads, 50...140 mm deck, 356 mm conning tower, 229...305 mm main turrets and barbettes
Machinery: oil fired boilers, 80 000 ihp = 27.56 kts
Range: 6 000 nm at 12 kts

Both of these light battleships are designed as raiding interdictors, trade protectors and coastal "colonial" defenders. Their main purpose is killing cruisers and they are not intended to fight with other battleships.
Author:  Keisser [ September 16th, 2017, 3:10 pm ]
Post subject:  Re: Keissers AU workshop
[ img ]
Length x Beam x Draught: 286,5 x 40,2 x 11,7 m
Displacement: 61 056 t standard, 68 138 t full load
Main armament: 4x2 420 mm (16.54")/55 cal guns
Secondaries: 8x2 150 mm/60, 10x2 105 mm/55 guns
Armor: 406 mm main belt, 203...406 mm turrets, 120 mm bulkheads, 180 mm deck, 457 mm conning tower
Machinery: diesel engines, geared drive, 200 000 ihp = 30,78 kts
Range: 12 407 nm at 14 kts
Page 1 of 1 All times are UTC
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/