| Shipbucket https://111903.jhzobq.asia/forums/ |
|
| New Junosia Small Arms (NationStates) https://111903.jhzobq.asia/forums/viewtopic.php?f=15&t=7113 |
Page 1 of 1 |
| Author: | SouprRacwn [ July 24th, 2016, 7:22 am ] |
| Post subject: | New Junosia Small Arms (NationStates) |
I won't post these designs on Gunbucket AU because I'm already working on Raermany, but I still want to post what I made using peices from other designs. I did not credit anyone (even myself) in making this, because I was working on this with a PC disconnected from the ever so great Internet. A partnership tokened by Fallout Firearms and Fabrique Nationale Herstal as the Vintovka of 2021 (V-21) (I am on this modern tech roleplay where it's set around 2021 and 2022). It uses 5.56x45mm rounds. The battle rifle version uses 7.62x45mm rounds (which will be manufactured by FNH IC). I do acknowledge the flaws of a bullpup rifle, and I observed the Steyr AUG (which is the best bullpup rifle ever). Why I had that cover-looking piece for the left side is because it's supposed to be another shell ejection for when your left handed, you can pinch and pull that cover off and just clip it on the right side and still not harm your face with hot brass. Another two neat features I discovered were: 1) Some flash hiders from Valments can be utilized as wire cutters (found that out on YouTube). 2) The bipod retainer of an IMI Galil (which I am considering to start on) was designed for opening bottles as well as using the bipod itself as a wire cutter (I did not put on a bipod retainer for this one, so the custom bipod built for this gun will be a wire cutter (but you can use the flash hider in case you forget that bipod). However, I don't see how useful it would actually be in covert ops. (Another feature: The padding on the dust cover is meant for the protection and comfort of the user. It clips on just like the ejection cover.) I'm gonna break your hearts with this blog post: http://anarchangel.blogspot.com/2005/03 ... -idea.html |
|
| Author: | heuhen [ July 24th, 2016, 9:58 am ] |
| Post subject: | Re: New Junosia Small Arms (NationStates) |
in this part of Shipbucket, only SB-scale drawing shall be posted. You'r drawing are not in SB-scale, and should be posted in "Non-Shipbucket Drawings" section. |
|
| Author: | acelanceloet [ July 24th, 2016, 10:42 am ] |
| Post subject: | Re: New Junosia Small Arms (NationStates) |
you used other gunbucket designs? then it is no excuse at all that you were not connected to the internet, as the author is listed on the image. All drawings on shipbucket are credited on the image for the simple reason that whenever someone uses them, he does not have to look up the original author or the origin: shipbucket.com and the authors name are already on the image. if you do not credit, you automatically grant anyone who sees your image the ability to use the image, including the parts you copied from someone else. |
|
| Author: | Colosseum [ July 24th, 2016, 7:45 pm ] |
| Post subject: | Re: New Junosia Small Arms (NationStates) |
You had internet access to post the image. |
|
| Author: | SouprRacwn [ July 30th, 2016, 3:12 am ] | |
| Post subject: | Re: New Junosia Small Arms (NationStates) | |
You had internet access to post the image.
I was on vacation at the time and I deleted the image that had the original authors. I am very sorry about it.
|
||
| Page 1 of 1 | All times are UTC |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|